Listed below are general rules and rules for each racing class. Links for MiniCup Stock and Modifieds websites are provided as well.
Rules
Pure Stock 4 Class
RULE BOOK DISCLAIMER: The rules and/or regulations set forth herein are designed to provide for the orderly conduct of racing events and to establish minimum acceptable requirements for such events. These rules shall govern the condition of all events, and by participating in these events, all participants are deemed to have complied with these rules. …
Race Procedure
RACING SURFACE No one is allowed on the racing surface at any time or for any reason unless that person is directed to go onto the racing surface by a Dillon Motor Speedway Official. In the event of wreck’s NO ONE except authorized safety personnel Dillon Motor Speedway officials are allowed on the track. We …
Protest and Inspection
1. DMS reserves the right to inspect any car at any time. Once the money is handed to the head tech official the protest is binding and cannot be reversed regardless of the reasons 2. All protest and inspection will be done at the discretion of and handled by DMS officials. Any car is subject …
Late Models
2013 CAR RULES COMPETING MODELS *Official – Points start May 4th* 1. 1970-2013 rear wheel drive model cars with a minimum wheelbase of 103” Wheelbase. Rules for the race cars are all the same. Different weights or Carbs are used to equal different motor combinations. It is a priority for Dillon Motor Speedway to make …
Super Trucks
COMPETING MODELS 1996-2013 truck models with a minimum wheelbase of 112” Wheelbase. TRUCK BODIES Aftermarket Stock appearing bodies allowed. Aftermarket body must meet speedway template specifications. All trucks must be painted and lettered professionally. Hood must fit to windshield. Rocker panels may be fabricated but must maintain 4” ground clearance. No “panning” underside of truck. …
Chargers
Chargers COMPETING MODELS (Official – Points start May 4, 2013 1970-2013 rear wheel drive cars with a minimum wheelbase of 104” Wheelbase. CAR BODIES 1. All cars must have a minimum of (2) doors, (2) rear quarter panels, deck lid, bumper cover, roof and hood. Body may be metal, plastic, or composite. 2. All bodies …
Street Stock
2013 Stock Chassis Car Division COMPETING MODELS (Official – Points Start May 4, 2013) • 1960-2013 models of OEM frame rear wheel drive cars. These cars can be equipped with 4, 6, or 8 cylinders. This class is designed to race stock OEM Car frames that are rear wheel drive. Wheelbase must be for make …
UCAR
Mandatory Safety Rules: 1. All inner structures of hood and trunk lid may be removed. Inner structures of inside top of car may be removed. Inner structures of door may be stripped. All roll bars must be a min 1-1/2″ x .083″ wall steel tubing. Cage installation MUST be approved by the speedway officials. Padding …
Fan Photos
Baymont Inn & Suites
